Why Business Valuation Multiples Differ Between Similar Firms

Daniel Callegari • November 18, 2026

Share this article

Melbourne's Business Skyline | Business Valuation Multiples

Picture two Australian firms reporting the same revenue and the same EBITDA.

Updated November 2026

One is valued at 3.0x earnings, the other at 6.0x. Same suburb, same industry, same headline numbers, and a two-times gap in the price a buyer will pay. (That pairing is an illustrative scenario, not a specific engagement, but the gap it describes is real and common.) Of Australia's 2,814,778 actively trading businesses at 30 June 2026, 996,203 employ staff ( ABS Counts of Australian Businesses, released 18 August 2026), and the owners of those businesses ask the same question when a peer's sale price surfaces.

The answer is that a multiple is not a price list. It is shorthand for the risk a buyer is accepting, and it is assembled from four separate layers: which earnings metric the multiple sits on, which size band the business falls into, which risks are priced into the number, and how the deal itself is structured. Separate those four layers and the gap between two apparently identical firms stops looking like market inconsistency and starts looking like arithmetic.

Key Takeaways:
  • Australian SME multiples typically range from 0.8x to over 8.0x earnings, a spread driven by sector risk, capital intensity, barriers to entry and growth trajectory rather than by market mood.
  • The earnings metric underneath the multiple changes the number: EBITDA-based valuations generally yield a multiple 0.5x to 0.7x higher than PEBITDA-based valuations, because the buyer is purchasing a business with less owner dependency.
  • Size changes the metric as well as the multiple. Under $250,000 of maintainable earnings the market prices PEBITDA or SDE; above $1 million of EBITDA it prices EBITDA.
  • Dispersion is the normal state of the market, not an anomaly. In Australian dental practices the observed range runs from 1.9x to 14.0x EBITDA around a median of 5.4x.

Why business valuation multiples differ between similar firms

Multiples differ because they price risk, growth and cash flow generating potential, and two firms that look alike on revenue rarely look alike on those three variables. Every multiple of earnings, revenues or book value is a function of the same three variables, and firms with higher growth, less risk and greater cash flow potential trade at higher multiples than firms with lower growth, higher risk and less cash flow potential ( Damodaran, Multiples: First Principles, current version at retrieval). The practical consequence is that a quoted multiple is a statement about a specific firm's fundamentals, not a market-wide rate.

The dispersion is measurable, not anecdotal. Liu, Nissim and Thomas, using 19,879 firm-years from 1982 to 1999 under the IBES industry classification, found that multiples within the same industry are widely dispersed: the interquartile range of pricing errors for same-industry EBITDA and price comparables was 0.553, widening to 1.163 at the 90th-to-10th percentile level and 1.631 at the 95th-to-5th level ( Liu, Nissim & Thomas, Equity Valuation Using Multiples, Journal of Accounting Research, March 2002). Even inside one industry classification, the middle half of firms were priced more than half an earnings unit apart.

Australian SME multiples typically range from 0.8x to over 8.0x earnings, varying by sector-specific risk profiles, capital intensity, barriers to entry and growth trajectories. That tenfold spread is the market working as designed: it is the price of difference, not evidence that buyers cannot agree on a formula.

What a valuation multiple is actually telling you

A multiple is a price standardised by a common variable, because raw prices cannot be compared between firms with different share counts, and the same standardisation problem is why two businesses of the same size are not automatically on the same multiple ( Damodaran, Multiples: First Principles, current version at retrieval). Dividing price by earnings, revenue or book value converts an absolute number into a comparable one. It does not convert a risky business into a safe one.

The operational difficulty sits in the comparison itself. No two firms are identical, and firms in the same business still differ on risk, growth potential and cash flows, which is why the price-earnings ratio specifically is a function of expected growth, risk and the payout ratio ( Damodaran, Multiples: First Principles, current version at retrieval). A buyer quoting a peer multiple is quoting the output of that peer's growth, risk and cash-flow profile, then applying it to a different profile.

Under the market approach, value is indicated by comparing the subject with identical or comparable assets and liabilities for which price information is available, and the units of comparison include EBITDA multiples, earnings multiples, revenue multiples and book value multiples ( IVS 103 Valuation Approaches, effective 31 January 2025). The standard also requires the market approach to take account of trading volume, trading frequency, the range of observed prices and proximity to the valuation date. A multiple lifted from a database with no view on those four factors is a number without its context.

Why do two businesses that look the same to me get valued on different multiples?

They get different multiples because the definition of a comparable firm is one with the same growth, risk and cash-flow characteristics, not one in the same business, and restricting comparables to the same industry is fairly restrictive ( Damodaran, Multiples: First Principles, current version at retrieval). Owners judge similarity on revenue and reported profit. Buyers judge it on maintainable earnings, transferability and risk, and those two tests produce different peer sets.

The standards require the gap to be quantified rather than assumed away. Where comparable market information does not relate to the exact or substantially the same asset, the valuer must perform a comparative analysis of qualitative and quantitative similarities and differences, and must document the reasons for the adjustments and how they were quantified ( IVS 103 Valuation Approaches, effective 31 January 2025). Under the guideline public company method, comparables are selected where possible from the same industry or one affected by the same economic factors, and the data is then adjusted having regard to the strengths and weaknesses of the subject asset relative to the selected companies ( RICS Valuation, Global Standards incorporating IVS, effective 31 January 2025).

Peer-group definition alone moves the answer. On observed Australian mining services transactions (drawn from public deal data and industry benchmarking reports), those businesses show 4.76x EBITDA on a narrow direct-peer group versus 6.29x EBITDA on a broader group including producing miners. Same sector, same earnings, two defensible peer sets, and a 1.53x difference in the multiple before any adjustment for the subject's own strengths and weaknesses.

Is my business being valued on EBITDA, PEBITDA or SDE, and does that change the multiple?

Yes, and the metric is often the largest single driver of the gap. EBITDA measures operating earnings with the owner's salary usually retained, is used by strategic buyers, and is the standard method for businesses above roughly $1 million of EBITDA. PEBITDA measures proprietor earnings before owner remuneration, with the owner's salary added back and then adjusted, and is used by owner-operator buyers for businesses below that threshold. SDE measures the total discretionary benefit available to one owner and is used for small businesses.

The same business can show a 3.0x PEBITDA multiple and a 5.0x EBITDA multiple. On revenue of $2,500,000, reported EBITDA of $300,000, an owner salary of $180,000 and $20,000 of personal vehicle expenses, PEBITDA is $500,000. A business where the owner works full time shows typical market evidence of 2.5x to 3.5x PEBITDA, an indicative enterprise value of $1.25 million to $1.75 million. The same business with a professional manager already employed shows 4.0x to 5.0x EBITDA, an indicative enterprise value of $1.2 million to $1.5 million. The multiple changes because the buyer profile changes.

The general differential runs the same way. EBITDA-based valuations generally yield a multiple 0.5x to 0.7x higher than PEBITDA-based valuations, due to reduced owner dependency and lower perceived risk. Note that the worked example implies a wider gap than the rule of thumb, and the two enterprise value ranges only partly overlap, which is the point: the multiple moves further than the value does, because the denominator moved too.

The error to avoid is mechanical. You cannot add back the owner's wage and then apply a larger EBITDA multiple. Adding back the wage inflates the denominator; applying the EBITDA multiple assumes a manager the business does not have.

Does the size of my business change the multiple a buyer will apply?

Size changes both the metric and the multiple, and the metric change comes first. Under $250,000 of maintainable earnings the market prices PEBITDA or SDE. Between $250,000 and $1 million of maintainable earnings it prices PEBITDA or EBITDA. Above $1 million of EBITDA it prices EBITDA, and above $5 million of EBITDA it prices EBITDA. These are broad observations rather than rules, and the boundaries are where buyer type changes rather than where value jumps.

The multiple itself also steps up with scale. Australian mid-market M&A transaction data, covering 1,591 deals transacted between 1 July 2023 and 31 December 2024, reports a median deal EV/EBITDA of 8.3 times, above a long-term average of 8.1 times, with medians of 7.0 times for targets under $20 million of revenue, 7.7 times at $20 million to $50 million, 10.0 times at $50 million to $100 million, 8.8 times at $100 million to $200 million, and 9.4 times in both the $200 million to $500 million and over $500 million bands, released 30 April 2025. The multiples are computed from disclosed valuation data drawn from market data providers, ASX, deal databases, industry research, transaction surveys and company announcements, and the disclosed-multiple subsample is 82 deals.

Two cautions belong with those figures. The Dealtracker bands describe mid-market transactions, not owner-operated SMEs, so the curve should not be extrapolated below $20 million of revenue. And the ABS size bands show how thin the upper market is: of the 2,814,778 actively trading businesses at 30 June 2026, 689,600 have one to four employees, 232,912 have five to nineteen, 68,325 have twenty to 199, and 5,366 have 200 or more ( ABS Counts of Australian Businesses, released 18 August 2026). Most Australian businesses sit below the revenue bands where published transaction multiples are even measurable.

Which risks in my business are actually dragging my multiple down?

The risks that move a multiple are the ones that survive the buyer's transferability test: scale, recurring revenue, customer diversification, risk profile, systems and processes, management team, growth profile and industry position. A business scoring low on those drivers shows low recurring revenue, weak systems, founder dependence, flat growth, a commodity position, high customer concentration and high owner dependency. A business scoring high shows the reverse on each count. The scorecard is a comparison, not a score: the question is which side of each line your business sits on.

The dispersion inside a single sub-sector shows how much those drivers are worth. Australian dental practices show a median of 5.4x EBITDA, ranging from 1.9x for highly owner-dependent single-chair clinics to 14.0x for corporatised multi-clinic networks. That is a 7x spread driven almost entirely by transferability and scale, inside one profession, in one market, measured on the same earnings metric.

Preparation is part of the risk profile, not a separate exercise. Poor financial presentation is one of the biggest causes of deal friction and valuation discounts. The financial readiness items that address it are unglamorous: financial statements up to date, revenue clearly separated by product or service, personal expenses identified, EBITDA adjustments substantiated, cash flow consistent, BAS and tax lodgements current, working capital requirements understood, and key customer concentration risks identified. Each of those items is a question a buyer will ask, and an unanswered question is priced as a risk.

How much do the buyer and the deal structure change the price I actually receive?

The buyer type sets the metric, and the deal structure determines how much of the headline enterprise value reaches the seller's bank account. A strategic buyer, an owner-operator and a financial buyer are solving different problems, and the metric each one prices reflects that: EBITDA for the strategic buyer of a professionally managed business, PEBITDA for the owner-operator who will work in it, SDE for the single-owner small business. The multiple follows the buyer, not the seller's preference.

The enterprise-to-equity bridge is where headline numbers and cash proceeds separate. On an enterprise value of $2,000,000, less net debt of $400,000, plus surplus cash of $150,000, the indicative equity value is $1,750,000. A seller who negotiates hard on the multiple and ignores the bridge can hand back more than the multiple gained, because net debt and surplus cash are agreed line items, not negotiating colour.

The standards are explicit that the multiple itself is a range requiring judgement. The market approach often uses market multiples derived from a set of comparables, each with different multiples, and selecting the appropriate multiple within the range may require adjustment and judgement considering qualitative and quantitative factors ( IVS 103 Valuation Approaches, effective 31 January 2025). Where the evidence stops is worth stating plainly: this article's sources do not carry verified Australian data on earnout prevalence, deferred consideration terms or working capital peg levels in lower mid-market deals, so those mechanics should be tested against the specific transaction rather than against a published benchmark.

How do I make my multiple defensible to the ATO and to a buyer's due diligence?

Defensibility rests on evidence, stated method and a standard of value that matches the purpose. APES 225 requires the member to gather sufficient and appropriate evidence by inspection, inquiry, computation and analysis to provide reasonable grounds that the valuation report and its conclusions are properly supported, with the extent and quality of evidence determined by professional judgement having regard to the nature of the valuation, the type of valuation service and the use to which the report will be put ( APESB, APES 225 Valuation Services, revised October 2024, effective for valuation services commencing on or after 1 January 2025). The report must also state the valuation approaches, methods and procedures adopted.

The engagement type determines how much freedom the valuer has, and it is disclosed. APES 225 distinguishes a Valuation Engagement, where the valuer selects the approaches, methods and procedures and gives a Conclusion of Value; a Limited Scope Valuation Engagement, where any restriction must be disclosed with its effect; and a Calculation Engagement, where the approaches, methods and procedures are agreed in advance and the output is a Calculated Value rather than a Conclusion of Value ( APESB, APES 225 Valuation Services, revised October 2024). APES 225 does not prescribe a single standard of value; the report must state the standard of value and its definition, and it must be appropriate to the purpose.

For tax purposes the standard of value is provision-specific and date-specific. The definition in subsection 995-1(1) of the ITAA 1997 does not provide a meaning to be applied in all contexts, and the applicable rule depends on the particular provision; absent a special definition, market value takes its ordinary meaning, informed principally by case law and the IVSC standards, with the willing but not anxious principle from Spencer v Commonwealth governing ( ATO, Market valuation for tax purposes, current at February 2025). The ATO states market value is the most probable price reasonably obtainable in the market on the valuation date, a meeting of the highest price reasonably obtainable by the seller and the lowest price reasonably obtainable by the buyer. Where parties do not deal at arm's length, capital proceeds are substituted with market value, and the first element of cost base is market value where no expenditure was incurred or the parties did not deal at arm's length ( ATO, TD 2024/5).

The small business CGT concessions add a threshold that is often confused with a valuation. The maximum net asset value test threshold is $5 million, the limit is not indexed for inflation, and the test is measured on the total market value of assets less liabilities relating to those assets, tested just before the CGT event, with assets and liabilities excluded together ( ATO, small business CGT concessions, last updated 10 August 2021). The threshold is a test of the owner's asset position, not a valuation of the business, and the sources in this article do not address how the valuation standards and the threshold interact, so that question belongs with a tax adviser.

The comparability test: interrogating any peer multiple quoted at you

Run this test before accepting any peer multiple, whether it arrives from a buyer, a broker or a database.

  1. Name the earnings metric. Is the quoted multiple on EBITDA, PEBITDA, SDE, revenue or ARR? A multiple without its metric is not a comparable.
  2. Check the numerator and denominator are consistent. An enterprise-value numerator belongs with a firm-value denominator; an equity numerator belongs with an equity denominator. A price-to-EBITDA multiple mixes an equity numerator with a firm-value denominator, which makes levered firms look cheap when they may be correctly priced ( Damodaran, Multiples: First Principles, current version at retrieval).
  3. Ask for the peer set, not the peer count. Mining services at 4.76x on a narrow direct-peer group versus 6.29x on a broader group including producing miners shows that the definition, not the data, sets the answer.
  4. Ask what was adjusted and by how much. IVS 103 requires the valuer to document the reasons for adjustments and how they were quantified where the comparable is not substantially the same asset ( IVS 103 Valuation Approaches, effective 31 January 2025).
  5. Check the date and the market. The market approach must take account of trading volume, trading frequency, the range of observed prices and proximity to the valuation date, so a multiple from a thin or distant market carries less weight.
  6. Separate enterprise value from equity value. Ask for the bridge: enterprise value, less net debt, plus surplus cash. The multiple prices the enterprise; the seller receives the equity value.
  7. Ask which of the eight value drivers the peer beats you on. Scale, recurring revenue, customer diversification, risk profile, systems and processes, management team, growth profile and industry position. If the peer wins on none of them, the multiple is not a comparable.

Frequently Asked Questions

What is a good multiple for an Australian SME?

There is no single aggregate figure, because why business valuation multiples differ comes down to sector. Australian SME multiples typically range from 0.8x to over 8.0x earnings, and the range narrows once you know the industry. Private, high-growth Australian tech businesses sit between 5.0x and 15.0x EBITDA, or 3.0x to 8.0x ARR. Australian healthcare assets generally command 5.0x to 9.0x EBITDA, and Australian pharmacies 5.0x to 8.0x+ EBITDA. These sector ranges reflect observed transaction and benchmarking evidence, and should be treated as indicative rather than definitive. A "good" multiple is therefore the one your sector, size band and risk profile support, not a market-wide number.

Why is my multiple lower than my peers'?

Usually because of owner dependency, customer concentration or weak systems, not because your earnings are worse. Two firms can post identical profit and still price differently once a buyer prices the risk of losing the founder or the top three clients. The earnings metric also matters: a business priced on PEBITDA carries a lower multiple than the same business priced on EBITDA, because the buyer is taking on more of the owner's role.

Is EBITDA or PEBITDA better for a small business?

Neither is better in the abstract; the right one follows the buyer. An owner-operator buying a sub-$1 million earnings business typically prices PEBITDA, while a larger, professionally managed entity is priced on EBITDA, which generally yields a multiple 0.5x to 0.7x higher. The trap is adding back the owner's wage and then applying the larger EBITDA multiple to the result. The multiple changes because the buyer profile changes.

How long does a valuation take, and what drives the cost?

Scope drives both. A short-form calculation for a single purpose can be turned around quickly, while a full valuation with market evidence, comparable transactions and a written report takes longer. The cost tracks the depth of evidence required, the number of comparable transactions analysed, and whether the report must withstand scrutiny from the ATO or a lender. A Calculation Engagement reports a Calculated Value, not a Conclusion of Value, and that distinction sets the price.

Will the ATO accept an internally prepared valuation?

It can, if the report meets the standards the ATO expects. APES 225 requires sufficient and appropriate evidence to provide reasonable grounds that the report and its conclusions are properly supported ( APESB, APES 225 Valuation Services, revised October 2024). In practice that means a stated purpose, valuation date and standard of value, a replicable methodology, transparent assumptions, and supporting evidence from financial statements, tax returns and market transactions. A spreadsheet with a number on it will not clear that bar.

Can I use a listed-company multiple as a benchmark for my private SME?

Only with heavy adjustment. Listed Australian biotech firms average around 11.08x EBITDA, and listed Australian construction and engineering firms show a historical median EV/EBITDA of 11.39x, but those figures price daily liquidity, scale and disclosure that a private SME does not have. Listed Australian application software providers show the same distortion from the other direction, at a historical average 3.7x EV/Revenue and a median of 1.6x. Use listed multiples to sense-check direction, not to set your price.

Turn valuation into a transaction strategy

Expert Business Advisors works with owners to establish the value baseline, prepare the business for market and manage buyer engagement through to completion.

Explore M&A Transaction Advisory Services

Final Take

Multiples differ between similar firms because four layers sit between the headline number and the price: the earnings metric, the size band, the priced risks and the deal structure. The metric alone can move a multiple by 1.5x on the same business, the peer-group definition can move it by 1.53x in the same sector, and the observed range inside one Australian sub-sector runs from 1.9x to 14.0x. None of that is market failure. It is the market pricing difference, and the difference is measurable.

The practical next step is to test your own number before someone else does. Take the multiple you have been quoted or have assumed, name its earnings metric, identify the peer set it came from, check what was adjusted and by how much, and bridge the enterprise value to the equity value you would actually receive. If the multiple cannot survive those questions, it will not survive a buyer's due diligence or an ATO review either. Having your multiple tested against market evidence, with the scope and fixed fee agreed before work begins, is the cheapest way to find out which of the four layers is doing the work in your case.

Selected references

What does this mean for your business?

A confidential conversation can help you consider your options and the next practical step.

Recent Posts

Valuing goodwill small business Australia
By Sam Vasli • November 18, 2026
How enterprise value becomes equity value, how goodwill falls out as a residual, and what the ATO and APES 225 expect from a small business valuation.
Melbourne's business skyline
By Sam Vasli • November 18, 2026
Understand Why relying on tax returns undermines your business's marketable price in Australian SME mergers and acquisitions deals
Melbourne city skyline
By Daniel Callegari • September 7, 2026
Learn the eight issues that cause buyers to discount a business during due diligence—and how sellers can prepare stronger evidence before exclusivity.
DCF and EBITDA multiples for an Australian mid-market business exit
By Daniel Callegari • September 7, 2026
See how buyers use EBITDA multiples and DCF, where negotiations are won or lost, and how sellers can build a defensible mid-market valuation case.
Melbourne city skyline
By Daniel Callegari • September 7, 2026
Understand the five questions buyers use to assess an Australian business, from maintainable earnings and revenue quality to cash needs and equity proceeds.
Business valuation costs for Australian businesses
By Daniel Callegari • September 7, 2026
Understand Australian business valuation fee tiers for $1M–$25M enterprises, what each scope includes, and how stronger evidence can protect value.
Buyer and seller negotiating price during due diligence
By Daniel Callegari • August 3, 2026
Understand why buyers request price reductions during due diligence, how to distinguish genuine risks from negotiation, and how sellers can protect value.
Planning a business exit
By Daniel Callegari • July 22, 2025
Plan your business exit with a clear strategy. Explore why early preparation and considered advice matter when getting ready to sell your business.
Preparing and selling a business
By Daniel Callegari • July 22, 2025
Explore the process of selling a business, from preparation and appraisal through marketing, negotiation, due diligence and settlement with Expert Business.
Assessing a business beyond its current profit
By Daniel Callegari • March 29, 2022
Explore the factors that may give a business value beyond its current profit, and why the circumstances of the business matter when considering a sale.